[Zaf]

Hello everyone, im new to BMW's, i have a e90 and wanted to know if any other brands alloys could fit my car i.e audi, mercedes alloy wheels?

If they wont fit, are there any ways if making them fit?

Thanks in advance guys

[Digitalize]

You can get adapters, they're typically 20mm thick minimum.

Land/Range Rover used to use 5x120, not sure if they still do.

VW vans are 5x120 as well I think?

BMW are the main manufacturer using the 5x120 PCD.

[achu]

Originally Posted by Digitalize

You can get adapters, they're typically 20mm thick minimum.

Land/Range Rover used to use 5x120, not sure if they still do.

VW vans are 5x120 as well I think?

BMW are the main manufacturer using the 5x120 PCD.

+1

and you need to make sure the centre bore is the same or more (if it's more, you will need spigot rings)... E90s are 72.6mm...

[Digitalize]

Centre bore can be fairly easily made bigger, so don't let a small CB put you off. It's much less important than PCD and Offset/Width

[achu]

Originally Posted by Digitalize

Centre bore can be fairly easily made bigger, so don't let a small CB put you off. It's much less important than PCD and Offset/Width

learn something new everyday... is it expensive?

[Zaf]

Some good info guys thanks!