Autel J2534 / SERIE E84 / ISTA/P - HELP!

[barthox]

Hello guys, I have an E84 SERIES (X1 N20) and I need to reprogram it with Autel Maxisys Pro (j2534).

Being an E series, I can't reprogram with ISTA + and then he tells me to use ISTA / P.

It was easy to use ISTA +, just install EDIABAS and BMW PTT with the autel drivers and everything works.

The doubt is the ISTA / P that does not communicate with AUTEL, I have already tried to emulate the K DCAN and also use RJ45 to USB adapter.

I will post some pictures of the error and then keep this topic updated.

Thanks for the space

It all started here:

a fault occurred on execution of the measure

94201 technical service initialization failed
-2 global.unknown
55054 global.unknown
10007 (CIP) - Fault during initialization of EDIABAS

Then I made some adaptations but it does not recognize the VIN automatically and I have no communication!