XBimmers X1   XBimmers X1
  XBimmers X1

Go Back   XBimmers | BMW X1 Forum > BIMMERPOST Universal Forums > Off-Topic Discussions Board

Post Reply
 
Thread Tools Search this Thread
      03-24-2020, 08:08 AM   #705
hooligan_G01
Space Shuttle Door Gunner
hooligan_G01's Avatar
6430
Rep
5,309
Posts

Drives: 2022 X3 M40i BG/Taco Red
Join Date: Nov 2017
Location: Back in the Mitten

iTrader: (1)

MI now on shelter in place orders for the next 3 weeks - the crew was here for 1/2 a day yesterday cleaning up a little.

Cabinets are set - the counter top guy did NOT make it out yesterday to template the counters, though.

The stove is roughly back in place and functioning, ditto for the refrigerator. Still no kitchen sink, obviously. Probably going to cut some pieces of plywood to use as counter tops in the meantime. Crap.
Appreciate 0
      03-24-2020, 03:29 PM   #706
lsturbointeg
Lieutenant General
lsturbointeg's Avatar
United_States
9149
Rep
14,522
Posts

Drives: 2011 535i Jet Black
Join Date: Aug 2014
Location: Asian lost in OH

iTrader: (0)

got the new texture done as well as painting the walls




foundation wall painted as well as the electrical conduits


installed all the new LED lights

__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~
Follow me on Instagram: lsturbointeg
Appreciate 2
MKSixer34171.50
      03-24-2020, 03:37 PM   #707
lsturbointeg
Lieutenant General
lsturbointeg's Avatar
United_States
9149
Rep
14,522
Posts

Drives: 2011 535i Jet Black
Join Date: Aug 2014
Location: Asian lost in OH

iTrader: (0)

over the Weekend i started tearing out the old ceiling in the basement. also gonna go with the industrial look with the flat black paint like i did in my son's room





so now i had to go back and start removing all the 2x4's that was framed out which the drywall ceiling was attached to






so the rest of the week i'll reinstall all the can lights. redo all the romex wires that way they're not hanging but fastened against all the floor joist to give it a cleaner look without lines going everywhere. i'll also have to decide to remove the cable lines that are hanging or run new lines and also have them run the same direction as the floor joist. in the end the basement ceiling now that it's been removed feels so much taller now.
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~
Follow me on Instagram: lsturbointeg
Appreciate 1
      03-26-2020, 02:58 PM   #708
lsturbointeg
Lieutenant General
lsturbointeg's Avatar
United_States
9149
Rep
14,522
Posts

Drives: 2011 535i Jet Black
Join Date: Aug 2014
Location: Asian lost in OH

iTrader: (0)

spent some time on one of the areas of the basement where i think the TV and couches will be. picked up 6" can lights from HD as well as 65w LED Soft White lights. got all the can lights installed as well as running new romex wires. i'm replacing all the old romex wires so anything you see hanging will be removed




here you can see i ran and fastened all the romex wires into the corners of the floor joist to make it a clean look. even tho it's gonna be painted black and you won't really see it i just want things to be neat and tidy.


installed and the lights work perfect!


now i'll start working the middle part of the basement where the pool table will be. plenty of new can lights will be installed and debating whether to install a hanging light i see with most pool table setups?
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~
Follow me on Instagram: lsturbointeg
Appreciate 3
      04-04-2020, 05:25 PM   #709
pukicabuki
Lieutenant
176
Rep
528
Posts

Drives: something with 4 wheels
Join Date: Jun 2011
Location: Oregon

iTrader: (0)

Our little project has begun.

It'll be a 4 car garage (2 tandem, 27' wide x 50' deep)+ workshop (22' x 14') and an 800sq/ft ADU for my parents.
Attached Images
  
__________________
'14 SQ5
'13 Land Cruiser
'94 TT Supra Hardtop

Last edited by pukicabuki; 04-05-2020 at 08:02 PM..
Appreciate 8
      04-05-2020, 12:34 AM   #710
E46M3forRay
Güdentyte
E46M3forRay's Avatar
1108
Rep
1,179
Posts

Drives: GT3 & 1M
Join Date: Jul 2010
Location: SF Bay Area

iTrader: (9)

Garage List
2011 1M  [0.00]
2023 Model 3  [0.00]
2014 991.1 GT3  [0.00]
2022 T4R TRD Pro  [0.50]
A little refresh on wife's kitchen. It was sorta my bday gift to her.

Before and after.
Attached Images
   
__________________
CURRENT - 991 GT3 | Future Classic 1M | Model 3 | T4R TRD Pro Lime Rush

SOLD - MB M2 CS | SMB F80 M3 CS | E90 M3 | E90 335i | E46 M3 Vert | E39 M5 | E34 525i
Appreciate 15
RickFLM410880.50
vreihen1614886.50
wrickem2101.00
King Rudi13152.00
MKSixer34171.50
ny325895.00
GERMAN M34176.50
PoorLurker1135.00
      04-05-2020, 07:33 AM   #711
RickFLM4
Brigadier General
RickFLM4's Avatar
United_States
10881
Rep
4,816
Posts

Drives: M4
Join Date: Jul 2015
Location: PB County, FL

iTrader: (0)

Quote:
Originally Posted by E46M3forRay View Post
A little refresh on wife's kitchen. It was sorta my bday gift to her.

Before and after.
Very nice. Did you refinish or replace the cabinets?
__________________
Current: 2018 SO/SS F83 ZCP
Gone: 2015 SO/SO F82
Appreciate 2
      04-05-2020, 09:30 AM   #712
E46M3forRay
Güdentyte
E46M3forRay's Avatar
1108
Rep
1,179
Posts

Drives: GT3 & 1M
Join Date: Jul 2010
Location: SF Bay Area

iTrader: (9)

Garage List
2011 1M  [0.00]
2023 Model 3  [0.00]
2014 991.1 GT3  [0.00]
2022 T4R TRD Pro  [0.50]
Refinish/painted. Cabinets appear to be in great condition and there wasn’t a need to replace.
__________________
CURRENT - 991 GT3 | Future Classic 1M | Model 3 | T4R TRD Pro Lime Rush

SOLD - MB M2 CS | SMB F80 M3 CS | E90 M3 | E90 335i | E46 M3 Vert | E39 M5 | E34 525i
Appreciate 2
RickFLM410880.50
      04-05-2020, 10:32 AM   #713
RickFLM4
Brigadier General
RickFLM4's Avatar
United_States
10881
Rep
4,816
Posts

Drives: M4
Join Date: Jul 2015
Location: PB County, FL

iTrader: (0)

Quote:
Originally Posted by E46M3forRay View Post
Refinish/painted. Cabinets appear to be in great condition and there wasn’t a need to replace.
We are in a similar position. Yellow-ish finish on oak cabinet doors that remain in good shape but we also prefer white cabinets. I've been a little hesitant to refinish over the oak because I'm not sure how the white would look with the oak grains. But I also haven't been excited about replacing perfectly functional cabinets due to design preferences.

I was also a little concerned about spray inside the house. Did you DIY this or have someone do it? Were the cabinets removed entirely and sprayed outside, or was any spray inside?

The other issue I've got is that the cabinet door design is different than your doors and my wife doesn't like the design of our doors. So we looked into refinishing, but with new doors / drawer fronts and adding some 12" cabinets on top of the 42's for more storage. When I was done pricing that, it was still less expensive than new cabinets, but not significantly so we reached a point of analysis paralysis (which at the moment I'm happy about).

Anyway, your pics look good. We may scale back our aspirations and just refinish with existing doors and drawers in light of current / anticipated economic conditions.
__________________
Current: 2018 SO/SS F83 ZCP
Gone: 2015 SO/SO F82
Appreciate 1
      04-05-2020, 12:03 PM   #714
E46M3forRay
Güdentyte
E46M3forRay's Avatar
1108
Rep
1,179
Posts

Drives: GT3 & 1M
Join Date: Jul 2010
Location: SF Bay Area

iTrader: (9)

Garage List
2011 1M  [0.00]
2023 Model 3  [0.00]
2014 991.1 GT3  [0.00]
2022 T4R TRD Pro  [0.50]
Quote:
Originally Posted by RickFLM4 View Post
We are in a similar position. Yellow-ish finish on oak cabinet doors that remain in good shape but we also prefer white cabinets. I've been a little hesitant to refinish over the oak because I'm not sure how the white would look with the oak grains. But I also haven't been excited about replacing perfectly functional cabinets due to design preferences.

I was also a little concerned about spray inside the house. Did you DIY this or have someone do it? Were the cabinets removed entirely and sprayed outside, or was any spray inside?

The other issue I've got is that the cabinet door design is different than your doors and my wife doesn't like the design of our doors. So we looked into refinishing, but with new doors / drawer fronts and adding some 12" cabinets on top of the 42's for more storage. When I was done pricing that, it was still less expensive than new cabinets, but not significantly so we reached a point of analysis paralysis (which at the moment I'm happy about).

Anyway, your pics look good. We may scale back our aspirations and just refinish with existing doors and drawers in light of current / anticipated economic conditions.
That was the drawback on oak cabinets were the grains. I was worried about it as well but it actually turned out pretty well than I expected. Grain was barely noticeable from afar unless you get very close to it. With multiple coats of paint, to me, the grain became as an added texture which gave the cabinets a nice character. It did crossed my mind for a reface but that was also close to having new cabinets installed. There's about 23 cabinet doors in this kitchen and that will surely add up.

I hired the cabinet pros to do this job as it's very intensive time consuming. They took all the cabinet doors to their shop to be painted and then covered all the openings on the box. One guy that came in everyday to do all the masking and covering the whole kitchen and then 2 guys came in to start sanding and paint the box. The cabinet doors were sprayed at their shop and the box was brushed.

The kitchen was decommissioned for about a month as I also coordinated a schedule on a new countertop install and backsplash so there was a good downtime. I don't know how I got it to work working on 3-4 contractors to do the job but it all turned out very well with my schedule and family.
__________________
CURRENT - 991 GT3 | Future Classic 1M | Model 3 | T4R TRD Pro Lime Rush

SOLD - MB M2 CS | SMB F80 M3 CS | E90 M3 | E90 335i | E46 M3 Vert | E39 M5 | E34 525i
Appreciate 1
      04-06-2020, 04:52 PM   #715
Hawkeye
Brigadier General
Hawkeye's Avatar
No_Country
2070
Rep
4,365
Posts

Drives: '07 Z4 Coupe, '21 X3, '16 GMC
Join Date: Aug 2007
Location: Iowa

iTrader: (0)

Garage List
Finally finished the closet to workspace change I was working on for a while.

Before and after. Still have a little cleanup (touch up paint and covering screws)
Attached Images
     
__________________
2007 Z4 3.0si Coupe • 6 MT • Black Saphire Metallic • PP • SP
2016 GMC Sierra SLT Z71 Premium Plus 4x4
2017 Harley StreetGlide • Denim Black • V&H Tune
2021 BMW x30i • Phytonic Blue Metallic • Fully loaded
Appreciate 3
      04-06-2020, 07:23 PM   #716
3 Stripes
Private
3 Stripes's Avatar
56
Rep
88
Posts

Drives: 2013 Alpine white F30
Join Date: Aug 2013
Location: Chicago

iTrader: (1)

Quote:
Originally Posted by lsturbointeg View Post
got the new texture done as well as painting the walls




foundation wall painted as well as the electrical conduits


installed all the new LED lights

What type of paint did you use?? How did you apply it?? I’ve been thinking about doing the same to my basement. Yours came out excellent!
Appreciate 0
      04-06-2020, 10:57 PM   #717
lsturbointeg
Lieutenant General
lsturbointeg's Avatar
United_States
9149
Rep
14,522
Posts

Drives: 2011 535i Jet Black
Join Date: Aug 2014
Location: Asian lost in OH

iTrader: (0)

Quote:
Originally Posted by 3 Stripes View Post
What type of paint did you use?? How did you apply it?? I’ve been thinking about doing the same to my basement. Yours came out excellent!
i used the 5 gal flat black paint from Home Depot. i will have to check and see what brand i went with but it was the only 5 gal flat black they stocked. i used a Wagner Spray gun from Home Depot as well.


works very well and easy to use. i would definitely do this as the previous owner of the house used drywall and as you can see he did not do a very good job


thanks for the comments. still currently working on running new romex wires so i should be painting the ceiling soon
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~
Follow me on Instagram: lsturbointeg
Appreciate 2
      04-07-2020, 12:10 AM   #718
DETRoadster
Space Force - 4 Star General
DETRoadster's Avatar
11446
Rep
3,264
Posts

Drives: M2 MG 6MT / Moto Guzzi V7
Join Date: Jul 2016
Location: Seattle

iTrader: (1)

Quote:
Originally Posted by hooligan_COLD View Post
Flooring in the main areas of the house complete (but all covered with cardboard/construction paper, so no pics). Most of the drywall repair complete, painting in progress, structural beams re-wrapped with cedar, cabinets going in!
That you on the ladder?
Appreciate 0
      04-07-2020, 05:20 AM   #719
hooligan_G01
Space Shuttle Door Gunner
hooligan_G01's Avatar
6430
Rep
5,309
Posts

Drives: 2022 X3 M40i BG/Taco Red
Join Date: Nov 2017
Location: Back in the Mitten

iTrader: (1)

Quote:
Originally Posted by DETRoadster View Post
That you on the ladder?
Ha! You got me.

That's actually our foreman, Jim. My beard is longer.
Appreciate 1
DETRoadster11446.00
      04-07-2020, 08:27 AM   #720
DETRoadster
Space Force - 4 Star General
DETRoadster's Avatar
11446
Rep
3,264
Posts

Drives: M2 MG 6MT / Moto Guzzi V7
Join Date: Jul 2016
Location: Seattle

iTrader: (1)

Quote:
Originally Posted by hooligan_COLD View Post
Ha! You got me.

That's actually our foreman, Jim. My beard is longer.
Appreciate 1
      04-07-2020, 10:59 AM   #721
Kilabyte
I'm Batman!
Poland
3942
Rep
1,471
Posts

Drives: Mineral White M3 6MT
Join Date: Jun 2019
Location: Massachusetts

iTrader: (1)

Quote:
Originally Posted by lsturbointeg View Post
i used the 5 gal flat black paint from Home Depot. i will have to check and see what brand i went with but it was the only 5 gal flat black they stocked. i used a Wagner Spray gun from Home Depot as well.
Came out great. Question: Did you back roll or just shoot the paint?

I wanted to redo my garage and spraying the paint seemed like a huge plus because of time savings but I've read that using a roller after is recommended. I just painted the entire upstairs last summer so more painting by hand was not something I was looking forward to doing anytime soon.
__________________

S55, 2JZ, M48.00
Appreciate 0
      04-07-2020, 06:37 PM   #722
lsturbointeg
Lieutenant General
lsturbointeg's Avatar
United_States
9149
Rep
14,522
Posts

Drives: 2011 535i Jet Black
Join Date: Aug 2014
Location: Asian lost in OH

iTrader: (0)

Quote:
Originally Posted by Kilabyte View Post
Came out great. Question: Did you back roll or just shoot the paint?

I wanted to redo my garage and spraying the paint seemed like a huge plus because of time savings but I've read that using a roller after is recommended. I just painted the entire upstairs last summer so more painting by hand was not something I was looking forward to doing anytime soon.
Less money on buying rollers and saving half the time now. I've painted my entire house by hand but I only looked into the spray gun because there's no way you can paint the ceiling with a roller and brush and making it look flawlessly. Also, because the wall isn't completely flat but brick the roller wouldn't have done a great job
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~
Follow me on Instagram: lsturbointeg
Appreciate 1
      04-17-2020, 08:41 AM   #723
Yapakanichi
Monkey Marshall
Yapakanichi's Avatar
621
Rep
218
Posts

Drives: 2005 Z4 3.0i
Join Date: Dec 2016
Location: FL

iTrader: (0)

Alright so I have been getting a lot of things taken care of around here.

We had new windows and a sliding glass door installed. They are from a company here called FHIA (florida home improvement associates). The windows are PVC and the glass is laminated (impact) double pane, argon gas filled, with LOE-366 and NEAT coating. Because the laminated part isn't their top of the line thickness (thinner is cheaper but still does the job) they can't technically say the windows are impact. But they will hold to 140 MPH.
The house is a lot quieter and cooler now. Before these the house was rocking single pane no coating aluminum windows from 1999.

Here is the sliding glass door. Now this is impact. Florida code is changing. I'm technically on the coast and the code is moving to impact for sliding glass doors.


This is one window I had the style changed on. This was a double single hung but I wanted more of a crisp clean view out the bedroom window.



Today we have stucco guys out to fix the bottom trim of the house. It's rusting everywhere and I also have a hole in the back of the house where you can see wood. (thank you stimulus check for allowing me the possibility to get this fixed)

I'm going to start redoing the baseboards. It has the traditional style that looks wavy. Thats the best way I can describe it. I'm changing to a more modern style which is pretty much a 1x4. The bedrooms were done when we did the floors. I just never caulked the joints till the wife and I worked in the fish/snake/workout room.
Appreciate 1
wrickem2101.00
      04-21-2020, 07:51 AM   #724
Savageenterprise
Captain
United_States
981
Rep
640
Posts

Drives: 2008 M3 (E93)
Join Date: Jul 2018
Location: Out and about

iTrader: (0)

Garage List
With all the free time due to thins whole thing I finally got some time on my hands to build a mantle shelf in my LR. Came up with the design myself after viewing some different mountings at HD.
Attached Images
     
__________________
"Hard times create strong men. Strong men create easy times. Easy times create weak men. Weak men create hard times."
Appreciate 5
      04-21-2020, 08:35 AM   #725
lsturbointeg
Lieutenant General
lsturbointeg's Avatar
United_States
9149
Rep
14,522
Posts

Drives: 2011 535i Jet Black
Join Date: Aug 2014
Location: Asian lost in OH

iTrader: (0)

Quote:
Originally Posted by Savageenterprise View Post
With all the free time due to thins whole thing I finally got some time on my hands to build a mantle shelf in my LR. Came up with the design myself after viewing some different mountings at HD.
Looks good
__________________
~F90Conversion~21"3Piece Forged AvantGardeWheels~KWV1Coilovers~CQUENCE slotted/drilled rotors~GoodridgeStainlesslines~MeisterschaftQuadEx haust~Akrapovic 4"tips~VRSF DP~VRSF CP~TurboSmart BOV~K&N filter~CarbonFiberExteriorComponents~GladenAlphaCo mponents~MatchUp7BMW~Punch P300-12T~
Follow me on Instagram: lsturbointeg
Appreciate 1
      04-21-2020, 09:03 AM   #726
Savageenterprise
Captain
United_States
981
Rep
640
Posts

Drives: 2008 M3 (E93)
Join Date: Jul 2018
Location: Out and about

iTrader: (0)

Garage List
Quote:
Originally Posted by lsturbointeg View Post
Looks good
Thanks man!
__________________
"Hard times create strong men. Strong men create easy times. Easy times create weak men. Weak men create hard times."
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:03 PM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST