02-25-2022, 06:35 AM | #1 |
Registered
0
Rep 2
Posts |
New member looking for advice.
Hi everyone.
I just purchase a 2014 X1 28i Xdrive. 120K miles. I had error codes P0172 & P00BD, after some quick google search , I replaced the MAF sensor (Bosch) , spark plugs, oil, air filter, valve cover and gaskets. Cleared the codes and they keep coming back. I have a few other random issues, like the driver side doesn't work via switch, all other windows work independently. I can use the key fob to roll down/up all the windows.- *I have already bought two master switches with the same results. The heater isn't blowing through the front or lower vents, and it doesn't appear to be blowing hot air, nor A/C. Below is the Error Memory report from Bimmer Code: Any advice will be appreciated. 00 Safety and information module (SIM) 2 errors A73E: DC-DC CONVERTER DSC / DXC E84 A6C8: HECKSCHEIBENHEIZUNG_RELAIS 12 Motor electronics 2 errors 2774: 0x2774 Air mass, plausibility: air mass too high 2BC1: 0x2BC1 Mixture control: Mixture too rich 20 Tyre pressure control 4 errors 6054: Error wheel sensor VL 6055: Error wheel sensor VR 6056: Error wheel sensor HL 6057: Error wheel sensor HR 56 Roof function centre 1 error A670: Error fitting sensor 0xA670 60 Instrument panel 1 error A56F: CAN_ID_2C3_ERROR_ID-Ausfall_oder_Alivefehler__COMBOX_ECall 2 62 MOST/CAN gateway (headunit/radio) 2 errors E190: Ring fracture diagnosis was performed (Error_Ring_Diagnose). E18F: Central registry does not match the target configuration (Error_Registry_New). 72 Basic body module 1 error 9CBA: Communication with LIN keypad interfered 78 Heating/air-conditioning control 8 errors 9C56: Temperature sensor footwell 9C5F: Temperature sensor ventilation 9C62: Temperature sensor evaporator 9C4C: Footwell flap (LIN) 9C52: Ventilation flap (LIN) 9C48: Mixed air flap left (LIN) 9C49: Mixed air flap on the right (LIN) 9C4A: Fresh air / circulating air / dynamic pressure flap (LIN) |
02-25-2022, 01:34 PM | #2 |
Major
600
Rep 1,343
Posts |
How old is your car battery? All these non-related Code emerging together may point to a central issue usually to do with the ECU not receiving enough voltage from the battery therefore triggering random fault codes.
It's worth a look at your battery age and strength. |
Appreciate
0
|
02-25-2022, 04:41 PM | #3 |
Captain
1183
Rep 868
Posts
Drives: 2024 BMW 230i xDrive
Join Date: Oct 2015
Location: Centennial, CO
|
Also be aware that you can't just replace the battery.
You have to register the battery with the car so that it knows to change the way it charges the new battery. Otherwise the new battery will have a very short life.
__________________
This post sent using 100% recycled electrons.
|
Appreciate
0
|
02-28-2022, 05:33 PM | #5 | ||
Registered
0
Rep 2
Posts |
Quote:
Quote:
Thank you both for your contributions. |
||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|