XBimmers X1   XBimmers X1
  XBimmers X1

Go Back   XBimmers | BMW X1 Forum > BMW X1 Forums > X1 DIY (Do-It-Yourself) Discussions

Post Reply
 
Thread Tools Search this Thread
      09-09-2019, 09:47 AM   #1
DoofyTheNut
New Member
0
Rep
15
Posts

Drives: 2013 328i xDrive
Join Date: Oct 2018
Location: North Carolina

iTrader: (0)

Custom Axle-back Exhaust

I just recently finished the fine-tuning of my axle back exhaust for my x1 35i. I had no idea what I was doing going into this project, but definitely had a blast doing so. I have been wanting to learn how to weld for a while, but haven’t had a good reason to buy a welder until I thought about making an exhaust. I decided to order some 304 stainless steel 2.5inch pipes from amazon seller “blackhorse racing” which seems to be reputable for the price. I ordered an 8 piece set of pipes, 2 90 degree, 2 45 degree, 2 180 degree bends and 2 48 inch straight pipes, as well as a magnaflow muffler. The biggest obstacle on fitment was finding a 2 bolt flange that would connect to the stock midpipes without any issues, so I decided to buy a muffler off of a 135i that had been wrecked and used the flange to connect to the midpipes. From there, it was completely trial and error, fitting the pipes together and marking them to tack weld, fit again, and then finally finish welding. I had both of my flange bolts/nuts break however, so I currently am using some hardware from Lowe’s to hold it all together until I can find a more permanent solution. But the end product right now is so amazing I can’t believe it. The muffler keeps the car quiet enough that it still retains that “sleeper” feel but when you go WOT it wakes up. There’s so much popping and burbles as well, and I should mention too that I do have a vrsf downpipe installed as well, so that will probably affect the sound. It took me probably 16 hours total and ~$650 including the welder and welding equipment, so I’m very happy with my investment. I was quoted $750 by a reputable shop to make a custom axle back, so I’d say the knowledge gained and the money saved made this project a 10/10.

If you have any questions, please let me know!
Attached Images
  
Appreciate 0
      09-10-2019, 03:19 PM   #2
Chicone
Private
15
Rep
90
Posts

Drives: 2015 X1 X35i M-SPORT
Join Date: Jun 2018
Location: Seattle, Wa

iTrader: (0)

That's really cool, as I know the options for our cars are slim. I miss my Borla. Great job, congrats and you picked up some skill at the same time. Fine tune it and turn it into a business! You would have buyers.
__________________
-Steve

2015 BMW X1 35i MSport // BMS Intake
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:33 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST