02-13-2019, 07:00 PM | #1 |
Registered
0
Rep 1
Posts
Drives: BMW X1 sDRIVE 20i 2012
Join Date: Jan 2019
Location: Johannesburg, South Africa
|
Faults codes after diy oil change
Need some advice please. My x1 e84 2012 n20 has strange issue. After oil change and reconnecting a new battery. ODB readings have no error codes. Only pending which I am not sure what that means. Interior light do not come on headlights are on as soon as engine is started and can not go in to reverse. Gear does engage but as sonn as I lift foot of the break it disengaged. Also not able to clear the service light which red and not yellow all of a sudden. Please share your wisdom I shall pay it forward..... 😊
|
02-13-2019, 07:22 PM | #2 |
Enlisted Member
13
Rep 33
Posts |
Starting with the basics, have you verified with a voltmeter that the battery is fully charged? If you have an OBD reader, what is the system listing for voltage when the car is running?
_Jeff |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
diy service, strange codes |
Thread Tools | Search this Thread |
|
|