[M4Tejas]

Originally Posted by GrussGott

You truly don't need anything more than a hydroshot and bucket ever for any reason. The only reason pros (should) use pressure washers is for speed, i.e., to do many cars fast.

I have the Kranzle + CR Spotless setup, and it's great n all but for DIYers it's purely for fun and totally unnecessary.



For DIYers a pressure washer is purely a toy.

I consider this the master setup:



It's basically Home Depot buckets full of de-ionized water & N914 waterless wash I get at the grocery store along with the smallest hydroshot, which has the benefit of a sprayer nozzle with a watering setting versus only the power settings.

The reason this is the sweet setup is because it's always 100% ready to go, so I can wash my X5 in 20 min including setup & cleanup.

After loads of testing, I use chenille mitts and the Garry Dean method.

So 1 of those buckets is for spraying down the car with rinseless wash, and another is for wetting down the mitts. After each pass the dirty mitt goes into the dirty bucket, I grab a clean mitt, dip it, do the next section, and repeat around the whole car. Then I dry the whole car with The Rag Co Twistresses.

I have drawers of TRC microfiber, but really only use the chenille mitts and microfiber madness large pads for the roof & hood


Then every month or so I'll do a 2nd pass with a water-based sealant; the best one IME is Turtle Wax Seal-n-Shine and if you want pop do a topper of TW Ice Spray Wax which has carnauba.

I don't do ceramic coatings on my paint (only wheels) because for me it's a complete waste as every 12-18 months I like to polish the car (which is also noobie simple & safe) so I'd just be polishing off the ceramic and *functionally* there's zero difference between monthly applied water-based sealants and 1,000 year duration resin-based ceramics.

I want you on my team. I was about to pull the trigger on https://rv-mods.com/spotless-water-di-systems/ product. Thank you very much! I knew this site was worth something. Bier money saved.