10-15-2014, 03:44 PM | #1 |
Veloce
10
Rep 145
Posts |
Brake Light Pulser
Has anyone installed a BLP (brake light pulser) on their 3rd brake light and would share their experience?
For example, how to remove the hardware to access the wires and which wires to cut
__________________
I may not have ended up where I intended to go,
but I know I've ended up where I'm intended to be. -Douglas Adams |
10-16-2014, 01:36 PM | #2 |
Private First Class
14
Rep 105
Posts |
Good question...
I have done the 'Pulser" in all my bimmers...now I look the third light and I'm not sure how to remove it, also I don't know what the OBC will do after wiring the controller in the brake system.
|
Appreciate
0
|
10-16-2014, 01:37 PM | #3 |
Private First Class
14
Rep 105
Posts |
Good question...
I have done the 'Pulser" in all my bimmers...now I look the third light and I'm not sure how to remove it, also I don't know what the OBC will do after wiring the controller in the brake light system.
|
Appreciate
0
|
10-16-2014, 03:35 PM | #5 |
Captain
60
Rep 675
Posts |
Euro spec cars have BFD2 (brake force display) which has additional blinking stop lights under hard deceleration and ABS activated. US spec cars have BFD1 which has fog lights illuminated (not blinking) under heavy deceleration (ABS doesn't need to be activated). These are coding options and can be altered.
|
Appreciate
0
|
10-16-2014, 03:55 PM | #6 |
Veloce
10
Rep 145
Posts |
I've seen other X BMWs on various forums talk about it, but no one has posted or mentioned how they accessed it..I really don't believe it will throw any codes as I haven't heard anyone mention this as a problem
__________________
I may not have ended up where I intended to go,
but I know I've ended up where I'm intended to be. -Douglas Adams |
Appreciate
0
|
10-16-2014, 05:11 PM | #7 | |
///M-Sport
9
Rep 63
Posts |
Quote:
BFD_1_ALGORITHMUS nicht_aktiv BFD2_AKTIV aktiv BFD2_BFD blinkend BFD2_BL blinkend BFD2_BL_M blinkend BFD2_ESS_ANZEIGE aktiv BFD2_ESS_ENABLE aktiv BFD2_NSL blinkend BFD2_SL_BL_1 blinkend BFD2_SL_BL_2 blinkend WBLG_WBL_ENABLE aktiv |
|
Appreciate
0
|
10-16-2014, 06:35 PM | #8 |
Captain
60
Rep 675
Posts |
I did it on mine but never tested it. I didn't put all lights blinking though, just the fog lights. I'm afraid people behind me wouldn't understand the message if all tail lights start blinking. Also to me the third brake light blinking looks tacky (scion, nissan... type)
|
Appreciate
0
|
10-19-2014, 07:41 PM | #9 |
Veloce
10
Rep 145
Posts |
Still looking for a source for the 3rd brake light access and wiring
__________________
I may not have ended up where I intended to go,
but I know I've ended up where I'm intended to be. -Douglas Adams |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|