10-29-2013, 10:01 PM | #23 |
Captain
60
Rep 675
Posts |
Successfully coded the following features:
Close Windows/Roof with key fob CAS KOMFORTSCHLIESSUNG_FB aktiv Unlock Doors when eject key fob (turn off engine with CA) CAS ER_KEYOUT_AUTOVR aktiv Auto eject key after ignition off while holding Start/Stop button (Not sure if this one is needed with CA but my doors unlock immediately afetr turn off engine) CAS KOMFORT_EJECT aktiv TIME TO HOLD START/STOP BUTTON FOR AUTOMATICALLY EJECTING KEY [TIME_MS=DATA*50] (LINKED TO [KOMFORT_EJECT]) CAS KOMFORT_AUS_IN_50MS wert_03 OE =15*50=750ms (I didn't change this one, wert_03 is the OEM setting) Wiper wipes to End position after turning engine off 2JBBF ZYCLUS_VOLLEND_KLR_AUS aktiv Auto Headlight Sensitivity adjustment from BC Button KOMBI LICHT_AUT_WERT_1 aktiv LICHT_AUT_WERT_2 aktiv LICHT_AUT_WERT_3 aktiv Digital Speed KOMBI BC_DIGITAL_V aktiv True digital speed KOMBI BC_DIGITAL_V_KORREKTUR nicht_aktiv Remove blanc line from BC menu KOMBI BC_LEERZEILE nicht_aktiv Side Marker Delete US NFRM SIDEMARKER_US_MIT_FRA_V nicht_aktiv Disable windows safety feature. Opening doors will not interrupt window roll up operation. NFRM FH_TUERAUF_STOP_MAUT_3R aktiv Double Blink Hazards NFRM DOPPELBLINKIMPULS_WARNBLK aktiv Changed the number of turn signal blinks. It's a setting for each key, so there are four settings to change. Use nettodat method: NFRM MIND_ANZ_ZYKL_TIPP_BLK AC off with auto mode. Seasonal setting. KLIMA_MIT_AUTO - four lines need to be changed nicht_aktiv Still researching about the following features: Enable the parked car ventilation option. I can't read 2URAD module. NCSExper gives me an error. Can't access 2URAD module with K+DCAN cable. 2URAD STANDHEIZUNG aktiv Recirculating air memory IHK UMLUFT_MEMORY aktiv Eco pro remember last state. Tested but not working. Eco-pro still defaults to OFF when engine is restarted. IHK ECO_PRO_LAST_FU aktiv Fuel Tank Reserve Warning. I like to put gas when I'm at quarter tank. Currently it warns me at around 1/8. KOMBI C08_TANK_SCHWELLE_RESERVE wert_01 Gear shift indicator in OBC. Tested but not working. Gear indicator is still standard D while driving. KOMBI SCHALT_PKT_BC aktiv True analog speed. Disable correction. Found other options. Doesn't work. KOMBI BC_V_KORREKTUR nicht_aktiv Found the following options that reflect the analog speed, but haven't played with: C08_K_ZAHL_TACHO - IMPULSES PER KILOMETER FOR SPEEDOMETER wert_06 77,5B E84 C08_K_ZAHL_TACHO_KOMPL - IMPULSES PER KILOMETER FOR SPEEDOMETER (COMPLEMENTARY) wert_06 88,A4 E84 C08_K_ZAHL_WEG - IMPULSES PER KILOMETER FOR ODOMETER wert_06 D2,5C E84 C08_K_ZAHL_WEG_KOMPL - IMPULSES PER KILOMETER FOR ODOMETER (COMPLEMENTARY) wert_06 2D,A3 E84 Freezing temp warning (lower limit) KOMBI AUSSENTEMP_ANZ_FEHLER_1 wert_03 36 Increase Angel Eyes Brightness NFRM PWM_SL_1_FKT_SL_TFL wert_09 currenly at this setting Eyebrows on with DRL Angel eyes different brightness at different stages Rear lights at different stages Last edited by d1saster; 10-31-2013 at 08:58 AM.. |
Appreciate
0
|
10-29-2013, 11:28 PM | #24 |
Private
17
Rep 59
Posts
Drives: BMW X1 xDrive28i M-Pkg & HK
Join Date: May 2013
Location: Texas, USA
|
hehehe....nahhhh that was the mini/bmw german dealers and service centers....what can i say...this is germany....everything is expensive here....and tech's for cars aren't many like US
|
Appreciate
0
|
10-30-2013, 10:26 PM | #25 |
Enlisted Member
8
Rep 44
Posts |
So I got my X1 coded. I can now roll up windows and fold in mirrors with key fob and comfort access. Amber delete on headlights. True digital speed and no more passenger seatbelt alarm since my dog rides up front. Fog lights turn on when unlocking. Overall pleased with outcome. Guy was great
|
Appreciate
0
|
10-30-2013, 11:30 PM | #26 | |
Captain
439
Rep 790
Posts |
Quote:
|
|
Appreciate
0
|
10-31-2013, 11:21 AM | #28 |
New Member
0
Rep 21
Posts |
|
Appreciate
0
|
10-31-2013, 03:29 PM | #29 |
Enlisted Member
8
Rep 44
Posts |
|
Appreciate
0
|
10-31-2013, 05:02 PM | #30 |
Captain
439
Rep 790
Posts |
|
Appreciate
0
|
11-02-2013, 08:39 PM | #31 |
New Member
1
Rep 9
Posts |
|
Appreciate
0
|
11-05-2013, 04:46 PM | #32 |
Enlisted Member
2
Rep 35
Posts
Drives: 2014 X1 xDrive35i, 2001 540iA
Join Date: Jul 2013
Location: SF Bay Area (East Bay)
|
I am also in No. CA (Pleasanton) and very interested in getting coding on my X1.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|