No start condition... please help!!!

MauX1 · 09-30-2022, 07:43 AM

Hello Everyone!!!

As the title says my car does not start and I have a Message in CIC about a problem to start. Message says:

"Engine start Fault. Engine start may not be possible. Engine might not restart if it is switched off."

There are no codes (INPA and BimmerLink read) except for CC-ID 718 on the dashboard. (Have not been able to find any info about this)

There is no ABS, BATT, OIL, MIL, or any other IGN2 indicator on the dash when I push the start button. Steering wheel does not unlock and there's no crank.

Do not know if related: My from brake pads require service (3% left according to BimmerLink) but I can not reset this. Sensor has been replaced but no change.

Hopefully someone can help me to solve this.... I need my car running

Thanks in advance.

cwickberg · 10-04-2022, 04:50 PM

See this...
https://www.endtuning.com/ccidcodes/

https://forums.m3cutters.co.uk/threa...-fault.214643/

Likely a module or your DME could be bad...

09-30-2022, 07:43 AM	#1
MauX1 Enlisted Member 8 Rep 44 Posts Drives: BMW X1 e84 Join Date: Apr 2022 Location: Mexico iTrader: (0)	No start condition... please help!!! Hello Everyone!!! As the title says my car does not start and I have a Message in CIC about a problem to start. Message says: "Engine start Fault. Engine start may not be possible. Engine might not restart if it is switched off." There are no codes (INPA and BimmerLink read) except for CC-ID 718 on the dashboard. (Have not been able to find any info about this) There is no ABS, BATT, OIL, MIL, or any other IGN2 indicator on the dash when I push the start button. Steering wheel does not unlock and there's no crank. Do not know if related: My from brake pads require service (3% left according to BimmerLink) but I can not reset this. Sensor has been replaced but no change. Hopefully someone can help me to solve this.... I need my car running Thanks in advance.
	Appreciate 0 Tweet Quote

10-04-2022, 04:50 PM	#2
cwickberg Second Lieutenant 32 Rep 279 Posts Drives: X1 35i MSport Ultimate, Join Date: Oct 2013 Location: United States iTrader: (0)	See this... https://www.endtuning.com/ccidcodes/ https://forums.m3cutters.co.uk/threa...-fault.214643/ Likely a module or your DME could be bad... Last edited by cwickberg; 10-04-2022 at 06:30 PM..
	Appreciate 1 JesBeemer54.00 Quote