04-05-2016, 08:02 PM | #1 |
Be Original.
267
Rep 523
Posts |
Front Bumper Removal
I need to take off my front bumper to fill the drilled holes.
How would I take it off? I've seen different videos but the steps don't match up. I have a 2012 28i. |
04-05-2016, 11:59 PM | #2 |
Lieutenant
125
Rep 545
Posts
Drives: x3 m40i
Join Date: Feb 2014
Location: Vancouver,BC
|
There is a video in the DIY section, the only problem is that the video tells you to remove 2 very difficult to get to bolts that is not necessary. All you need to do is take out the bolt visible from the top and then use a plastic splice to separate the bumper from the fender.
Make sure you get some of the plastic rivits. Here is a diagram for another BMW, but it was the best illustration I could find. The most difficult part is separating the bumper and fender. Last edited by Njerts; 04-06-2016 at 12:06 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|