DRL Switched Supply From Ignition - XBimmers

Dilbert2402 · 04-20-2012, 05:13 PM

Hi All,
I'm all ready to install DRL's onto my non xenon fitted X1 but the one thing I cannot locate is the switched supply. I need a supply that is accessible in the engine bay to connect to the switching relay for the DRL's to keep me legal. Any help would be much appreciated.

(zo) · 04-25-2012, 01:57 PM

Use the power outlet on the cargo bay on the right, it comes on when the engine is on.
But you have to run the wire from the rear to the front which is not hard.

Dilbert2402 · 01-11-2013, 04:18 PM

The problem I have with this is running the wire through the bulkhead into the engine bay. Any suggestions?

sanchaym · 03-11-2013, 03:47 AM

True that

04-20-2012, 05:13 PM	#1
Dilbert2402 New Member Drives: X1 2.0ED Join Date: Apr 2012 Location: Hampshire, England Posts: 14 iTrader: (0)	DRL Switched Supply From Ignition Hi All, I'm all ready to install DRL's onto my non xenon fitted X1 but the one thing I cannot locate is the switched supply. I need a supply that is accessible in the engine bay to connect to the switching relay for the DRL's to keep me legal. Any help would be much appreciated.
	Tweet

03-11-2013, 03:47 AM	#4
sanchaym New Member Drives: BMW X1 2012 December Join Date: Mar 2013 Location: New delhi, India Posts: 10 iTrader: (0)	Yes True that

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

04-25-2012, 01:57 PM	#2
(zo) Registered Drives: BMW x1 20d Join Date: Nov 2011 Location: Australia Posts: 3 iTrader: (0)	Use the power outlet on the cargo bay on the right, it comes on when the engine is on. But you have to run the wire from the rear to the front which is not hard.

01-11-2013, 04:18 PM	#3
Dilbert2402 New Member Drives: X1 2.0ED Join Date: Apr 2012 Location: Hampshire, England Posts: 14 iTrader: (0)	The problem I have with this is running the wire through the bulkhead into the engine bay. Any suggestions?