Quote:
Originally Posted by jaeezzy
Sounds good  However, below are my concerns..
It wasn't that the fsc codes couldn't be reimported/activated once dealer wipes it, it's that, I was advised, in some cases I might have to send the whole CIC unit itself to them to be able to reimport/activate fsc code which I don't think is feasible.
Since, I'm in Australia, I guess I'll have to do the wiring/installation myself esp. for 6NF base plate that I want along with 6NR. This is my first bimmer, first car and a brand new one. So, I want to make sure what I'm doing before I start doing it. I started a whole new thread requesting for some instructions here..
What are the things I require for you guys to do remote fsc code importation/activation? Do you guys provide them? Also, if dealer were to wipe it off what's the cost to get a new fsc code and to reimport/reactivate it?
Here's what I'm actually after:
I already have 6NS base plate in my centre armrest. Since it doesn't support video I want to replace it with 6NF base plate and be able to use media snap-in adapter that I have now for iPhone 4/4s for videos. Since I need 6NR for it to work, I'm looking at getting 6NR + 6NF and hence be able to use BMW Apps, plugins and the video. At the moment my car is equipped with Pro Nav (609), Convenience Telephony (6NS) and Internet (614). I'm not sure about combox as I can't see it listed anywhere in my order list 
What would be the initial cost to have this activated/installed on my car first time? |
I can see at least three threads where you posted pretty much the same questions about this retrofit and I am not even sure where I should answer them
None of our customers had to send the CIC back to us to have the 6NR reactivated. EVER. So I wouldn't be worried about it...
If you want us to help you we need your VIN to start with. You can email it to
info@bimmer-tech.net and we will get back to you with a quote.
You can also check if we have any installer in your area if you do not want to install it yourself:
http://www.bimmer-tech.net/dealers
However if you have a cradle the installation is not that difficult and you will receive instructions from us.