Here is the data logging MHD needs in order to improve the tune. I'm unable to do so at the moment because of traveling but if anyone wants to help out the group feel free to send them your logs.
For the logs i need you to do the following:
****DSC Completely turned off for all logging****
1. normal driving acceleration from a dead stop up to cruising speed and cuise for like 20-30 seconds.
2. 3rd and a 4th gear WOT pull from 2800-3000rpms start point up to about 6500rpms
3. a third gear shifting into 4th gear WOT pull. starting in 3rd gear around 3500rpms or so. once in 4th hold WOT for about 3-4 seconds and let off. (this checks post shift timing recovery).
Please include the following parameters in yours logs:
Accel Ped. Pos.
Boost
Boost target
Boost Target Ex
Fuel mode
Gear
IAT
Lambda bank 1
LTFT
MAF
Oil temp
Rail pressure mean
RPM
STFT 1
Throttle Position
Timing Cyl. 1
Torque act. clutch
Torque Limit 1-3
Boost setpoint factor
Cyl1 Timing Cor
Cyl2 Timing Cor
Cyl3 Timing Cor
Cyl4 Timing Cor
Cyl5 Timing Cor
Cyl6 Timing Cor
Load actual
Load req
MAF req. WGDC
WGDC After PID
WGDC base
WGDC
Quote:
Originally Posted by BmoreBimmerX1
I know exactly what you mean. I actually reached out to them about it. I’ll share their feedback with the group.
|