|
N20 JB4 cable from DME into glove box
Has anyone tried routing the bms usb cable from their DME box through the firewall into the glove box. I have watched several DIY sites, but on my car when I took out the DME and partitions there was a solid cover in front of the hole that people are referencing. I tried banging on it really hard with some tools and could not get it to come out.
I also just installed the BMS Meth kit on my N20. I bought the 2.3gal one and the instructions copied below reference a small button to prime the engine. I can not find it.
N55 Only:
With ignition on and JB4 software connected press the small button in the upper right hand corner repeatedly to activate/test the pump. Each press will activate the pump for around a second and it should take 6-8 seconds to push all the air from the pump an get it properly primed.
|