View Single Post
      06-29-2013, 06:04 PM   #7
xyz100
Private
21
Rep
92
Posts

Drives: Challenger
Join Date: Jan 2013
Location: Texas

iTrader: (0)

Part 2 - oil change

Changing oil is easy:
1. Use belt wrench or another wrench to remove filter cap.
2. Pull old filter from the housing. Replace two o-rings on the cap.
3. Undo the drain plug (10mm hex ).
4. Replace the drain plug. I reused the old one. The o-ring on it seemed to be OK. Will check for leaks later.
5. Install new filter and put the cap on.
6. Fill with oil. It takes 5-1/4 quarts.
Start the engine. Done.
Attached Images
      
Appreciate 0