[NeiL010204]

Update 20220131: In relation to my Original Post,I just want to share my experience.I just recently service the car from the Dealership Related to Recall: 20E-A01.And as expected,the Battery Replacement recommendation plus other 4 items (Coolant Flushing,ATF,AWD,Fuel Injection).I'm still working from Home and recently had observed the convenience access is not working (Touching Door HandleP Car will unlock) and have seen the error "car lifter" indicating battery is in low charge.My car is always plugin in with a trickel charger.Overall,I did replaced with an Oreilly After Marktet Battery and purchased the Bimmerlink for the registration,upon uninstalling OEM Battery I did noticed the battery bolt terminal is not tight but not loose,installed new battery.Knowing I have a new battery ,I'm still seeing the same "car lifter" error and one case the battery error appeared in the dash.To ensure,I did torque the bolts for both positive and negative.The positive did reached torque requiments 15 N-M,the negative bolt did not and as classis I over torque and snap the bolt.I just made a DIY for some M Screw available and all are working fine.Note: I tested the OEM Battery with a Harbor Freight Tester and showed "Good" with a HIGH CCA Reading of 900A,battery was charged using tricke charger.So for others that may have encounre same issue or anyn battery related issue,please double check tighness of the terminal battery.I'll maintan my OEM as a back up assuming its still ok.