View Single Post
      11-21-2012, 10:45 PM   #4
conceyted
Private
conceyted's Avatar
9
Rep
81
Posts

Drives: 2013 X1
Join Date: Oct 2012
Location: New Orleans, LA

iTrader: (0)

Per the manual:

Quote:
Automatic Engine Start/Stop
Function
The concept
The Auto Start/Stop function helps save fuel. The system switches off the engine during a stop, for instance in congestion or at traffic lights. The ignition remains switched on. The engine starts automatically when you wish to drive away. Certain vehicle components may experience additional wear as a result of this system.

Automatic operation
The automatic engine Start/Stop function is operational after each engine start.
The function is activated at a certain speed:
▷ Automatic transmission: at 5 mph/9 km/h.

Automatic engine stop
The engine is switched off automatically during a stop under the following conditions:

Automatic transmission:
▷ The selector lever is in transmission position D.
▷ The brake pedal remains depressed while the vehicle is at a standstill.
▷ The driver's safety belt is fastened or the driver's door is closed.
When the engine is switched off, the air volume of the automatic climate control is reduced.

Note: The engine is not switched off automatically in the following situations:
▷ External temperatures below approx. 37 ℉/+3 ℃.
▷ High external temperature and operation of the automatic climate control.
▷ The interior is not yet heated or cooled as much as desired.
▷ The engine is not yet at operating temperature.
▷ Sharp steering angle or the steering wheel is being turned.
▷ After driving in reverse.
▷ Fogging of the windows when the automatic climate control is switched on.
▷ Vehicle battery charge is very low.
▷ Hood is unlocked.
▷ HDC is activated.
▷ Stop-and-go traffic.
▷ The selector lever is in position N or S/M.
or if the Start/Stop Off indicator lamp is lit.
Appreciate 0