To remove the trim is not hard a all. You just need to be careful and take your time. Everything snaps out it will not seem that way till you give a good pull (carefully) then you'll see how easy it is to remove. I didn't have to remove the gear shift nob as the boot just snaps out then so dose the trim. The I drive nob needs to snap out of the trim as well after you snap the trim itself out. You will see screws underneath the I drive box that needs to be unscrewed too. The dash board you will need to disconnect the hazard button and the vent after you pop it out. I have inclosed a pic of tools you'll need.
The carbon wrap material is called:
Order Details:
Code Item Qty Price Grand Total
DINOC1170 Black Gloss 3M DI-NOC Carbon Fiber DINOC Flex Wrap CA-1170
[Select Size:4ft x 4ft (48in x 48in) (16 Sq/ft)] 1 $94.99 $94.99
Subtotal: $94.99
Tax: $0.00
Shipping Cost: $9.42
Grand Total: $104.41
http://www.metrorestyling.com
(You can get it off amazon too same company)
The red thin line was a 3M pen strip tape that I slowly applied to the bottom of the trim.
You will also need a hair dryer to help heat the wrap on the edges and corners.
I hope this helps. My baby is in the shop now having her boobs (dash ) done LOL
Does anyone know how to take the side mirror caps off? Do the snap off?