View Single Post
      11-04-2012, 09:28 AM   #1
Bill B.
Lieutenant
Bill B.'s Avatar
United_States
18
Rep
439
Posts

Drives: '18 M2, '13 X135i '15 S1000R
Join Date: Sep 2011
Location: Cary, NC

iTrader: (0)

DIY: V1 Radar Detector Install

There are several DIYs available for hardwiring a V1 in many different BMWs, and the X1 install is practically identical to the 1XX. But, I figured I'd provide a write-up for the X1.

Purpose
This installation is to hardwire a windshield mounted V1 radar detector to an ignition enabled fuse.

Tools Required
Philips screwdrivers
Torx drivers
Nylon trim removal tools
Wire cutters, strippers, crimpers

Supplies Used
Valentine Direct-Wire Power Adapter Kit #00030
WirthCo 30103 Tapa Circuit for ATM Mini Fuse Blocks
Wire Ties
Locktite (optional)


Step 1- Lower Trim
Remove the lower trim panel beneath the glove box, held with two screws and one tab. After removing the screws, drop down and pull toward the seat to remove.
Attached Images
  
Appreciate 0