Quote:
Originally Posted by stanjohn123
Hi, Njerts. I'm planning to get these as below but without the HID bulb's
http://www.aliexpress.com/item/For-B...354551144.html
So I guess I will need 4 X D1S HID bulb's and ballasts , right ? I'm planning t go for CN Light's HID and Hyluxtek ballasts.
What else do I need for it to fit and work perfectly ? |
Ok, that is what I have. They came with D1S bulbs and ballasts.
If you get them without, you only need 1 bulb and ballast per headlight since the inside "projector" is just a dummy for looks. It is just a shiny black plastic insert.
The outside projector is bi-xeon (Hi and Low beam)
You will also need to code
1) Turn off DRL on High Beams if it is on (That is low volt to High beam for DRL)
2) Switch DRL to angle eyes
3) Maybe turn off voltage monitor if you get error codes.
I used BMWhat for that.