View Single Post
      07-07-2012, 05:55 PM   #33
dronski
New Member
Russian Federation
5
Rep
11
Posts

Drives: X3 3.0d XDrive
Join Date: Jun 2012
Location: Ufa

iTrader: (0)

Quote:
Originally Posted by morski View Post
I asked the same question to Patryk but never got any reply. Mainly looking for the cables etc

Dronski; can you tell me how much you got you cic units for?
Thanks
Hi Morski!
I have got the list of p/n's on one of the Russian BMW forums (thnx to Valery Val1X)

65209154413 (GPS ANTENNA WITH BRACKET) from E93 - you can find GPS antenna on Ebay much cheaper
66539245515 (Control unit, reversing camera)
84109229740 (Hands-free charging electronics, High) - it's a Mulf, do not needed if you a planning to install Combox
66212162439 (Reversing camera retrofit kit)
65412208572 (Retrofit kit, USB/audio interface)
65159135687 (Bracket for telematics control unit/SES) - required for installation of combox in the baggage compartment
84132180456 (Bracket) - required for installation of combox in the driver's leg's compartment (above pedals)
84640441949 (Basic hands-free unit, Bluetooth)
61119215854 (HSD - Pipe CIC - USB)
61119129361 (Connecting line HUB/MULFII)
84109257160 (Combox Media) - you can buy on ebay cheaper or you can find telematics unit
66209225822 (Control unit PDC) - for displaying of the PDC on the LCD
61129196805 (Cable set, USB)
61136913644 (Covering cap)
61126960966 (Antenna cable), 61126960976 (Antenna cable) - not mandatory
61136913626 (Universal socket housing uncoded) - 2 ea
61136925156 (HF socket housing, angled)
07119902612 (Hex Bolt) - 4 ea
07119915703 (Self-locking hex nut) - 4 ea
07148263913 (Fillister head self-tapp.screw w collar) - 10 ea
07146960289 (Sheet metal nut, self-locking) - 10 ea
07147122390 (Fillister head screw) - 30 ea
61130006663 (Bushing contact) - 10 ea
61130005197 (Bushing contact) - 10 ea
61138366598 (Flat-spring contact, microtimer) - 10 ea
61138380698 (Plug housing)
61136954526 (Universal socket housing uncoded)
61319167196 (USB socket) - for the glove box
61119185171 (Connecting lead, CIC / display)
41248147832 (Hex nut with flange) - 4 ea
07129906048 (Hex nut) - 4 ea
61119207251 (USB repair cable)
65206959147 (Roof antenna)
65829205177 (Controller) - i-drive joystick
51162991683 (Frame, central operating unit)
61138384580 (Plug housing)
65509224965 (Central information display)
65509210357 (Trim, on-board monitor, 8.8")
51452991260 (Cover, function carrier centre)
51452991262 (Cover, function carrier centre)
51452991264 (Frame)
65129199905 (Replacement CIC)
51452991241 (Trim panel dashboard) - I've seen on some forums and guy who sold me the CIC said that dashboard for Radio Professional can be modified for installation of CIC main unit

All pictures you can find on the realoem.com

Obviously that not all of these spares will be required for the retrofitting of CIC (of course depending on your requirements )

Currently I want to install CIC with BT and USB, but without Navi.
After some study of ISTA D/P I have made some kind of a conclusion that hardware installation is not a big issue. Main concern for me is a coding/programming, I have no idea where to start from.
Recently I have ordered D-Can cable on Ebay, but did not have a chance to play with it yet cause I am in the business trip now and will be at home only in the mid-August.

I have paid for the head unit, LCD including bracket and i-drive controller about 1000 USD (at the current exchange rate, local price is 32000 roubles). Bought all hardware in Russia. Everything is used and imported from USA. Cables are not included.

Average prices in Russia for used CIC (without cables and small stuff) about 1200-1300 USD. Plus 700-800 USD for installation and coding.
Appreciate 0