View Single Post
      11-04-2012, 11:05 AM   #6
Bill B.
First Lieutenant

Bill B.'s Avatar
Drives: '12 135i, '13 X1 35i
Join Date: Sep 2011
Location: Cary, NC

Posts: 385
iTrader: (0)

Step 6 - Install Power Adapter

Step 6 - Install Power Adapter
The power adapter ground wire can be attached to the existing dash support bracket bolt. Spread the crimp fork slightly, and it will seat between the bolt head and existing washer.

Put the 2 amp fuse supplied by the V1 kit into the tapa fuse top slot. Then, plug in the tapa into empty fuse slot #5. This provides an ignition enabled source.

Connect the straight cable to the V1 adapter, and mount the adapter using the supplied velcro tape.

Test the V1.
Attached Images